power supply ac-dc

1.145W Single Output, 2.Certificate: CE 3.we are factory for power supply

Switching Power Supply,ac/dc adapter,power supply efficiency,high voltage power supply,power switching,change power supply,variable power supply,Switching Power Supply,single swiching power supply,adapter

Low price and high reliability105 output capacitorAC input power suitable for the worldHight efficiency and low operation temperatureSoft-start current can reducan reduce the AC input impact effecticlyWith Short-circuit and owwerload protectionCompact size,light weight100% full-load burning testInstalled with EMI filter,minimum wave
ModelSpecification	S-145-5	S-145-7.5	S-145-12	S-145-24
DC output voltage	5V	7.5V	12V	24V
Output voltage errorNote2	±2%	±1%	±1%	±1%
Rated output current	25A	18A	12A	24A
Output current rage	0-25A(Biggest30A	0-18A(Biggest21A	0-12A(Biggest14A	0-24A(Biggest7A
Wave and noise(Note 3	100mVp-p	100mVp-p	100mVp-p	100mVp-p
Inlet stability(Note 4	±0.5%	±0.5%	±0.5%	±0.3%
Load stablity (Note 5	±0.5%	±0.5%	±0.5%	±0.3%
DC output power	125W	135W	144W	144W
Efficiency	78%	80.5%	80.5%	83.5%
Adjustable range for DC voltage	4.75-5.5V	6-8V	10.8-13.2V	21-28V
AC input voltage range	85-132VAC/170-264VACSelected by switch47-63Hz240-370VDC
Input current	0.5A/115V 0.25A/230A
AC INnrush current	Cold-start current15A/115V 30A/230V
Leakage current	<0.5mA/240VAC
Overload proctection	105%-150%Type:Foldback:current limiting reset:auto recovery
High-temperature protection
Temperature coefficient	±0.03%/0-50
Setup rise hold up time	100ms,50ms,20ms
Vibration	10-500HZ,2G 10min,/1cycle,Period for60min,Each axes
Withstand voltage	Input and output internal1.5KVAC,Input and enclosure1.5KVAC,Output and enclosure0.5KVAC
Isolation resistance	Input and output internal:Input and enclosure,Output and enclosure500VDC/100MΩ
Working temperature and humidity	-10~+60Refer to output derating curve,20%~90%RH
Store temperature and humidity	-20~+85,10%~95%RH
Overall dimension	199×98×38mm
Weight	0.7Kgs
Safety standards	Meet UL 1012 requirement(Not apply for the mark)
EMtd>EMC standards	Meet FCC part15J Conduction classB
Note1.The testing condition for the paramenter above is :230VAC input,rated load,2570% RH.Humidity.2.Error.include the setting error,line stability and load stability.(Note:5).3.Wave test:adopting "A12"double wire for 20MHz,and 0.1UF&47UF capacitor short-circuit for interrupting.4.Inlet voltage stability test:when is over load,the lowest voltage of inlet is up to the highest voltage.5.Load stability test:the load is from 0% to 100%.

 

power supply ac-dc